Search filters the loaded procedure list locally. Separate terms must all match (use quotes for an exact phrase). Cached STIG Search results apply when you arrive from Search.
Objective ID
Severity
Discussion
V-13591
high
When data of a classified nature is migrated to a web server, fundamental principles applicable to the safeguarding of classified material must be followed. A classified web server needs to be afforded physical security commensurate with the classification of its content to ensure the protection of the data it houses.
V-13613
medium
The IAVM process does not address all patches that have been identified for the host operating system or, in this case, the web server software environment. Many vendors have subscription services available to notify users of known security threats. The site needs to be aware of these fixes and make determinations based on local policy and what software features are installed, if these patches need to be applied.
In some cases, patches also apply to middleware and database systems. Maintaining the security of web servers requires frequent reviews of security notices. Many security notices mandate the installation of a software patch to overcome security vulnerabilities.
SAs and ISSOs should regularly check the vendor support web site for patches and information related to the web server software. All applicable security patches will be applied to the operating system and to the web server software. Security patches are deemed applicable if the product is installed, even if it is not used or is disabled.
In some cases, patches also apply to middleware and database systems. Maintaining the security of web servers requires frequent reviews of security notices. Many security notices mandate the installation of a software patch to overcome security vulnerabilities.
SAs and ISSOs should regularly check the vendor support web site for patches and information related to the web server software. All applicable security patches will be applied to the operating system and to the web server software. Security patches are deemed applicable if the product is installed, even if it is not used or is disabled.
V-13619
medium
Running the web server with excessive privileges presents an increased risk to the web server. In the event the web server’s services are compromised, the context by which the web server is running will determine the amount of damage that may be caused by the attacker. If the web server is run as an administrator or as an equivalent account, the attacker will gain administrative access through the web server. If, on the other hand, the web server is running with least privilege required to function, the capabilities of the attacker will be greatly decreased.
V-13620
medium
A PKI certificate is a digital identifier that establishes the identity of an individual or a platform. A server that has a certificate provides users with third-party confirmation of authenticity. Most web browsers perform server authentication automatically; the user is notified only if the authentication fails. The authentication process between the server and the client is performed using the SSL/TLS protocol. Digital certificates are authenticated, issued, and managed by a trusted Certification Authority (CA).
The use of a trusted certificate validation hierarchy is crucial to the ability to control access to your server and prevent unauthorized access. This hierarchy needs to lead to the DoD PKI Root CA or to an approved External Certificate Authority (ECA) or are required for the server to function.
The use of a trusted certificate validation hierarchy is crucial to the ability to control access to your server and prevent unauthorized access. This hierarchy needs to lead to the DoD PKI Root CA or to an approved External Certificate Authority (ECA) or are required for the server to function.
V-13621
high
Web server documentation, sample code, example applications, and tutorials may be an exploitable threat to a web server. A production web server may only contain components that are operationally necessary (e.g., compiled code, scripts, web-content, etc.). Delete all directories that contain samples and any scripts used to execute the samples. If there is a requirement to maintain these directories at the site on non-production servers for training purposes, have NTFS permissions set to only allow access to authorized users (i.e., web administrators and systems administrators). Sample applications or scripts have not been evaluated and approved for use and may introduce vulnerabilities to the system.
V-13672
medium
Without the use of a certificate validation process, the site is vulnerable to accepting certificates that have expired or have been revoked. This would allow unauthorized individuals access to the web server. This also defeats the purpose of the multi-factor authentication provided by the PKI process.
V-13687
medium
Remote web authors should not be able to upload files to the DocumentRoot directory structure without virus checking and checking for malicious or mobile code. A remote web user whose agency has a Memorandum of Agreement (MOA) with the hosting agency and has submitted a DoD form 2875 (System Authorization Access Request (SAAR)) or an equivalent document will be allowed to post files to a temporary location on the server. All posted files to this temporary location will be scanned for viruses and content checked for malicious or mobile code. Only files free of viruses and malicious or mobile code will be posted to the appropriate Document Root directory.
V-13724
medium
These Timeout requirements are set to mitigate the effects of several types of denial of service attacks. Although there is some latitude concerning the settings themselves, the requirements attempt to provide reasonable limits for the protection of the web server. If necessary, these limits can be adjusted to accommodate the operational requirement of a given system.
V-13725
medium
The KeepAlive extension to HTTP/1.0 and the persistent connection feature of HTTP/1.1 provide long lived HTTP sessions which allow multiple requests to be sent over the same connection. These requirements are set to mitigate the effects of several types of denial of service attacks. Although there is some latitude concerning the settings themselves, the requirements attempt to provide reasonable limits for the protection of the web server. If necessary, these limits can be adjusted to accommodate the operational requirement of a given system.
V-13726
medium
The number of seconds Apache will wait for a subsequent request before closing the connection. Once a request has been received, the timeout value specified by the Timeout directive applies. Setting KeepAliveTimeout to a high value may cause performance problems in heavily loaded servers. The higher the timeout, the more server processes will be kept occupied waiting on connections with idle clients. These requirements are set to mitigate the effects of several types of denial of service attacks.
V-13731
medium
CGI scripts are one of the most exploited vulnerabilities on web servers. CGI script execution in Apache can be accomplished via two methods. The first method uses the ScriptAlias directive to tell the server everything in that directory is a CGI script. The second method uses a combination of the Options directive and AddHandler or SetHandler directives. For situations where the combination of the Options directive and Handler directives are used, the ability to centrally manage scripts is lost, creating vulnerability on the web server. It is best to manage scripts using the ScriptAlias directive.
V-13732
medium
The Options directive configures the web server features that are available in particular directories. The FollowSymLinks option controls the ability of the server to follow symbolic links. A symbolic link allows a file or a directory to be referenced using a symbolic name raising a potential hazard if symbolic linkage is made to a sensitive area. When web scripts are executed and symbolic links are allowed, the web user could be allowed to access locations on the web server that are outside the scope of the web document root or home directory.
V-13733
high
The Options directive configures the web server features that are available in particular directories. The IncludesNOEXEC feature controls the ability of the server to utilize SSIs while disabling the exec command, which is used to execute external scripts. If the full includes feature is used it could allow the execution of malware leading to a system compromise.
V-13734
medium
Directory options directives are directives that can be applied to further restrict access to file and directories. MultiViews is a per-directory option, meaning it can be set with an Options directive within a <Directory>, <Location> or <Files> section in httpd.conf, or (if AllowOverride is properly set) in .htaccess files. The effect of MultiViews is as follows: if the server receives a request for /some/dir/foo, if /some/dir has MultiViews enabled, and /some/dir/foo does not exist, then the server reads the directory looking for files named foo.*, and effectively fakes up a type map which names all those files, assigning them the same media types and content-encodings it would have if the client had asked for one of them by name. It then chooses the best match to the client's requirements.
V-13735
medium
Directory options directives are directives that can be applied to further restrict access to file and directories. If a URL which maps to a directory is requested, and there is no DirectoryIndex (e.g., index.html) in that directory, then mod_autoindex will return a formatted listing of the directory which is not acceptable.
V-13736
medium
Buffer overflow attacks are carried out by a malicious attacker sending amounts of data that the web server cannot store in a given size buffer. The eventual overflow of this buffer can overwrite system memory. Subsequently an attacker may be able to elevate privileges and take control of the server. The Apache directives listed below limit the size of the various HTTP header sizes thereby limiting the chances for a buffer overflow.
The LimitRequestBody directive allows the user to set a limit on the allowed size of an HTTP request message body within the context in which the directive is given (server, per-directory, per-file or per-location). If the client request exceeds that limit, the server will return an error response instead of servicing the request. The size of a normal request message body will vary greatly depending on the nature of the resource and the methods allowed on that resource. CGI scripts typically use the message body for retrieving form information. Implementations of the PUT method will require a value at least as large as any representation that the server wishes to accept for that resource.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
The LimitRequestBody directive allows the user to set a limit on the allowed size of an HTTP request message body within the context in which the directive is given (server, per-directory, per-file or per-location). If the client request exceeds that limit, the server will return an error response instead of servicing the request. The size of a normal request message body will vary greatly depending on the nature of the resource and the methods allowed on that resource. CGI scripts typically use the message body for retrieving form information. Implementations of the PUT method will require a value at least as large as any representation that the server wishes to accept for that resource.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
V-13737
medium
Buffer overflow attacks are carried out by a malicious attacker sending amounts of data that the web server cannot store in a given size buffer. The eventual overflow of this buffer can overwrite system memory. Subsequently an attacker may be able to elevate privileges and take control of the server. This Apache directive limits the size of the various HTTP header sizes, thereby limiting the chances for a buffer overflow.
The LimitRequestFields directive allows the server administrator to modify the limit on the number of request header fields allowed in an HTTP request. A server needs this value to be larger than the number of fields that a normal client request might include. The number of request header fields used by a client rarely exceeds 20, but this may vary among different client implementations, often depending upon the extent to which a user has configured their browser to support detailed content negotiation. Optional HTTP extensions are often expressed using request header fields.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks. The value should be increased if normal clients see an error response from the server that indicates too many fields were sent in the request.
The LimitRequestFields directive allows the server administrator to modify the limit on the number of request header fields allowed in an HTTP request. A server needs this value to be larger than the number of fields that a normal client request might include. The number of request header fields used by a client rarely exceeds 20, but this may vary among different client implementations, often depending upon the extent to which a user has configured their browser to support detailed content negotiation. Optional HTTP extensions are often expressed using request header fields.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks. The value should be increased if normal clients see an error response from the server that indicates too many fields were sent in the request.
V-13738
medium
Buffer overflow attacks are carried out by a malicious attacker sending amounts of data that the web server cannot store in a given size buffer. The eventual overflow of this buffer can overwrite system memory. Subsequently an attacker may be able to elevate privileges and take control of the server. This Apache directive limits the size of the various HTTP header sizes, thereby limiting the chances for a buffer overflow.
The LimitRequestFieldSize directive allows the server administrator to reduce or increase the limit on the allowed size of an HTTP request header field. A server needs this value to be large enough to hold any one header field from a normal client request. The size of a normal request header field will vary greatly among different client implementations, often depending upon the extent to which a user has configured their browser to support detailed content negotiation. SPNEGO authentication headers can be up to 12392 bytes.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
The LimitRequestFieldSize directive allows the server administrator to reduce or increase the limit on the allowed size of an HTTP request header field. A server needs this value to be large enough to hold any one header field from a normal client request. The size of a normal request header field will vary greatly among different client implementations, often depending upon the extent to which a user has configured their browser to support detailed content negotiation. SPNEGO authentication headers can be up to 12392 bytes.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
V-13739
medium
Buffer overflow attacks are carried out by a malicious attacker sending amounts of data that the web server cannot store in a given size buffer. The eventual overflow of this buffer can overwrite system memory. Subsequently an attacker may be able to elevate privileges and take control of the server. This Apache directive limits the size of the various HTTP header sizes, thereby limiting the chances for a buffer overflow.
The LimitRequestLine directive allows the server administrator to reduce or increase the limit on the allowed size of a client's HTTP request-line. Since the request-line consists of the HTTP method, URI, and protocol version, the LimitRequestLine directive places a restriction on the length of a request-URI allowed for a request on the server. A server needs this value to be large enough to hold any of its resource names, including any information that might be passed in the query part of a GET request.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
The LimitRequestLine directive allows the server administrator to reduce or increase the limit on the allowed size of a client's HTTP request-line. Since the request-line consists of the HTTP method, URI, and protocol version, the LimitRequestLine directive places a restriction on the length of a request-URI allowed for a request on the server. A server needs this value to be large enough to hold any of its resource names, including any information that might be passed in the query part of a GET request.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
V-2230
low
Copies of backup files will not execute on the server, but can be read by the anonymous user if special precautions are not taken. Such backup copies contain the same sensitive information as the actual script being executed and as such are useful to malicious users. Techniques and systems exist today which search web servers for such files and are able to exploit the information contained in them. Backup copies of files are automatically created by some text editors such as emacs and edit plus. Having backup scripts on the web server provides one more opportunities for malicious persons to view these scripts and use information found in them.
V-2232
medium
Normally, a service account is established for the web server. This is because a privileged account is not desirable and the server is designed to run for long uninterrupted periods of time. The SA or Web Manager will need password access to the web server to restart the service in the event of an emergency as the web server is not to restart automatically after an unscheduled interruption. If the password is not entrusted to an SA or web manager the ability to ensure the availability of the web server is compromised.
V-2234
medium
It is important to segregate public web server resources from private resources located behind the DoD DMZ in order to protect private assets. When folders, drives or other resources are directly shared between the public web server and private servers the intent of data and resource segregation can be compromised.
V-2235
medium
Normally, a service account is established for the web service to run under rather than permitting it to run as part of the local system. The password on such accounts must be changed at least annually. If the password is not changed periodically, the potential for a malicious party to gain access to the web services account is greatly enhanced.
V-2236
medium
The presence of a compiler on a production server facilitates the malicious user’s task of creating custom versions of programs and installing Trojan Horses or viruses. For example, the attacker’s code can be uploaded and compiled on the server under attack.
V-2242
medium
To minimize exposure of private assets to unnecessary risk by attackers, public web servers must be isolated from internal systems. Public web servers are by nature more vulnerable to attack from publically based sources, such as the public Internet. Once compromised, a public web server might be used as a base for further attack on private resources, unless additional layers of protection are implemented. Public web servers must be located in a DoD DMZ Extension, if hosted on the NIPRNet, with carefully controlled access. Failure to isolate resources in this way increase risk that private assets are exposed to attacks from public sources.
V-2243
medium
Private web servers, which host sites that serve controlled access data, must be protected from outside threats in addition to insider threats. Insider threat may be accidental or intentional but, in either case, can cause a disruption in service of the web server. To protect the private web server from these threats, it must be located on a separate controlled access subnet and must not be a part of the public DMZ that houses the public web servers. It also cannot be located inside the enclave as part of the local general population LAN.
V-2246
high
The web server Software, Apache 2.0, is no longer supported for security updates and is not evaluated or updated for vulnerabilities, leaving it open to potential attack. Organizations must transition to a supported Apache release to ensure continued support.
V-2247
high
As a rule, accounts on a web server are to be kept to a minimum. Only administrators, web managers, developers, auditors, and web authors require accounts on the machine hosting the web server. This is in addition to the anonymous web user account. The resources to which these accounts have access must also be closely monitored and controlled. Only the SA needs access to all the system’s capabilities, while the web administrator and associated staff require access and control of the web content and web server configuration files. The anonymous web user account must not have access to system resources as that account could then control the server.
V-2248
medium
All automated information systems are at risk of data loss due to disaster or compromise. Failure to provide adequate protection to the administration tools creates risk of potential theft or damage that may ultimately compromise the mission. Adequate protection ensures that server administration operates with less risk of losses or operations outages. The key web service administrative and configuration tools must be accessible only by the authorized web server administrators. All users granted this authority must be documented and approved by the ISSO. Access to the IIS Manager will be limited to authorized users and administrators.
V-2251
low
Just as running unneeded services and protocols is a danger to the web server at the lower levels of the OSI model, running unneeded utilities and programs is also a danger at the application layer of the OSI model. Office suites, development tools, and graphical editors are examples of such programs that are troublesome. Individual productivity tools have no legitimate place or use on an enterprise, production web server and they are also prone to their own security risks.
V-2255
medium
In addition to OS restrictions, access rights to files and directories can be set on a web site using the web server software. That is, in addition to allowing or denying all access rights, a rule can be specified that allows or denies partial access rights. For example, users can be given read-only access rights to files, to view the information but not change the files.
This check verifies that the htpasswd file is only accessible by system administrators or web managers, with the account running the web service having group permissions of read and execute. Htpasswd is a utility used by Netscape and Apache to provide for password access to designated web sites. I
This check verifies that the htpasswd file is only accessible by system administrators or web managers, with the account running the web service having group permissions of read and execute. Htpasswd is a utility used by Netscape and Apache to provide for password access to designated web sites. I
V-2257
low
There are typically several individuals and groups that are involved in running a production web site. In most cases, we can identify several types of users on a web server. These are the System Administrators (SAs), Web Managers, Auditors, Authors, Developers, and the Clients. Accounts will be restricted to those who are necessary to maintain web services, review the server’s operation, and the operating system. A detailed record of these accounts must be maintained.
V-2259
medium
This check verifies that the key web server system configuration files are owned by the SA or Web Manager controlled account. These same files which control the configuration of the web server, and thus its behavior, must also be accessible by the account which runs the web service. If these files are altered by a malicious user, the web server would no longer be under the control of its managers and owners; properties in the web server configuration could be altered to compromise the entire server platform.
V-2261
medium
Incoming E-mail has been known to provide hackers with access to servers. Disabling the incoming mail service prevents this type of attacks. Additionally, Email represents the main use of the Internet. It is specialized application that requires the dedication of server resources. To combine this type of transaction processing function with the file serving role of the web server creates an inherent conflict. Supporting mail services on a web server opens the server to the risk of abuse as an email relay. This check verifies, by checking the OS, that incoming e-mail is not supported.
V-2264
medium
Windows Scripting Host (WSH) is installed under either a Typical or Custom installation option of a Microsoft Network Server. This technology permits the execution of powerful script files from the Windows NT command line. This technology is also classified as a Category I Mobile Code. If the access to these files is not tightly controlled, a malicious user could readily compromise the server by using a form to send input to these scripting engines.
V-2271
medium
By their very nature, CGI type files permit the anonymous web user to interact with data and perhaps store data on the web server. In many cases, CGI scripts exercise system-level control over the server’s resources. These files make appealing targets for the malicious user. If these files can be modified or exploited, the web server can be compromised. These files must be monitored by a security tool that reports unauthorized changes to these files.
V-26285
medium
Modules are the source of Apache httpd servers core and dynamic capabilities. Thus not every module available is needed for operation. Most installations only need a small subset of the modules available. By minimizing the enabled modules to only those that are required, we reduce the number of doors and have therefore reduced the attack surface of the web site. Likewise having fewer modules means less software that could have vulnerabilities.
V-26287
medium
The Apache mod_dav and mod_dav_fs modules support WebDAV ('Web-based Distributed Authoring and Versioning') functionality for Apache. WebDAV is an extension to the HTTP protocol which allows clients to create, move, and delete files and resources on the web server. WebDAV is not widely used, and has serious security concerns as it may allow clients to modify unauthorized files on the web server. Therefore, the WebDav modules mod_dav and mod_dav_fs should be disabled.
V-26294
medium
The Apache mod_info module provides information on the server configuration via access to a /server-info URL location, while the mod_status module provides current server performance statistics. While having server configuration and status information available as a web page may be convenient, it’s recommended that these modules NOT be enabled: Once mod_info is loaded into the server, its handler capability is available in per-directory .htaccess files and can leak sensitive information from the configuration directives of other Apache modules such as system paths, usernames/passwords, database names, etc. If mod_status is loaded into the server, its handler capability is available in all configuration files, including per-directory files (e.g., .htaccess) and may have security-related ramifications.
V-26299
medium
The Apache proxy modules allow the server to act as a proxy (either forward or reverse proxy) of http and other protocols with additional proxy modules loaded. If the Apache installation is not intended to proxy requests to or from another network then the proxy module should not be loaded. Proxy servers can act as an important security control when properly configured, however a secure proxy server is not within the scope of this STIG. A web server should be primarily a web server or a proxy server but not both, for the same reasons that other multi-use servers are not recommended. Scanning for web servers that will also proxy requests is a very common attack, as proxy servers are useful for anonymizing attacks on other servers, or possibly proxying requests into an otherwise protected network.
V-26302
medium
The UserDir directive must be disabled so that user home directories are not accessed via the web site with a tilde (~) preceding the username. The directive also sets the path name of the directory that will be accessed. The user directories should not be globally enabled since it allows anonymous access to anything users may want to share with other users on the network. Also consider that every time a new account is created on the system, there is potentially new content available via the web site.
V-26305
medium
The PidFile directive sets the path to the process ID file to which the server records the process ID of the server, which is useful for sending a signal to the server process or for checking on the health of the process. If the PidFile is placed in a writable directory, other accounts could create a denial of service attack and prevent the server from starting by creating a PID file with the same name.
V-26322
medium
The ScoreBoardFile directive sets a file path which the server will use for Inter-Process Communication (IPC) among the Apache processes. If the directive is specified, then Apache will use the configured file for the inter-process communication. Therefore if it is specified it needs to be located in a secure directory. If the ScoreBoard file is placed in openly writable directory, other accounts could create a denial of service attack and prevent the server from starting by creating a file with the same name, and or users could monitor and disrupt the communication between the processes by reading and writing to the file.
V-26323
medium
The Apache Directory directive allows for directory specific configuration of access controls and many other features and options. One important usage is to create a default deny policy that does not allow access to Operating System directories and files, except for those specifically allowed. This is done, with denying access to the OS root directory. One aspect of Apache, which is occasionally misunderstood, is the feature of default access. That is, unless you take steps to change it, if the server can find its way to a file through normal URL mapping rules, it can and will serve it to clients. Having a default deny is a predominate security principal, and then helps prevent the unintended access, and we do that in this case by denying access to the OS root directory. The Order directive is important as it provides for other Allow directives to override the default deny.
V-26324
medium
The Apache Options directive allows for specific configuration of options, including execution of CGI, following symbolic links, server side includes, and content negotiation. The Options directive for the root OS level is used to create a default minimal options policy that allows only the minimal options at the root directory level. Then for specific web sites or portions of the web site, options may be enabled as needed and appropriate. No options should be enabled and the value for the Options Directive should be None.
V-26325
medium
Use the Apache TraceEnable directive to disable the HTTP TRACE request method. Refer to the Apache documentation for more details http://httpd.apache.org/docs/2.2/mod/core.html#traceenable. The HTTP 1.1 protocol requires support for the TRACE request method which reflects the request back as a response and was intended for diagnostics purposes. The TRACE method is not needed and is easily subject to abuse and should be disabled.
V-26326
medium
The Apache Listen directive specifies the IP addresses and port numbers the Apache web server will listen for requests. Rather than be unrestricted to listen on all IP addresses available to the system, the specific IP address or addresses intended must be explicitly specified. Specifically a Listen directive with no IP address specified, or with an IP address of zero’s should not be used. Having multiple interfaces on web servers is fairly common, and without explicit Listen directives, the web server is likely to be listening on an inappropriate IP address / interface that was not intended for the web server. Single homed system with a single IP addressed are also required to have an explicit IP address in the Listen directive, in case additional interfaces are added to the system at a later date.
V-26327
medium
The ScriptAlias directive controls which directories the Apache server "sees" as containing scripts. If the directive uses a URL-path name that is different than the actual file system path, the potential exists to expose the script source code.
V-26368
medium
To identify the type of web servers and versions software installed it is common for attackers to scan for icons or special content specific to the server type and version. A simple request like http://example.com/icons/apache_pb2.png may tell the attacker that the server is Apache 2.2 as shown below. The many icons are used primary for auto indexing, which is recommended to be disabled.
V-26393
medium
The Apache OverRide directive allows for .htaccess files to be used to override much of the configuration, including authentication, handling of document types, auto generated indexes, access control, and options. When the server finds an .htaccess file (as specified by AccessFileName) it needs to know which directives declared in that file can override earlier access information. When this directive is set to None, then .htaccess files are completely ignored. In this case, the server will not even attempt to read .htaccess files in the file system. When this directive is set to All, then any directive which has the .htaccess Context is allowed in .htaccess files.
V-26396
medium
The HTTP 1.1 protocol supports several request methods which are rarely used and potentially high risk. For example, methods such as PUT and DELETE are rarely used and should be disabled in keeping with the primary security principal of minimize features and options. Also since the usage of these methods is typically to modify resources on the web server, they should be explicitly disallowed. For normal web server operation, you will typically need to allow only the GET, HEAD and POST request methods. This will allow for downloading of web pages and submitting information to web forms. The OPTIONS request method will also be allowed as it is used to request which HTTP request methods are allowed.
V-60709
medium
During the initial setup of a Transport Layer Security (TLS) connection to the web server, the client sends a list of supported cipher suites in order of preference. The web server will reply with the cipher suite it will use for communication from the client list. If an attacker can intercept the submission of cipher suites to the web server and place, as the preferred cipher suite, a weak export suite, the encryption used for the session becomes easy for the attacker to break, often within minutes to hours.
V-6485
low
Backing up web server data and web server application software after upgrades or maintenance ensures that recovery can be accomplished up to the current version. It also provides a means to determine and recover from subsequent unauthorized changes to the software and data.
A tested and verifiable backup strategy will be implemented for web server software as well as all web server data files. Backup and recovery procedures will be documented and the Web Manager or SA for the specific application will be responsible for the design, test, and implementation of the procedures.
The site will have a contingency processing plan/disaster recovery plan that includes web servers. The contingency plan will be periodically tested in accordance with DoDI 8500.2 requirements.
The site will identify an off-site storage facility in accordance with DoDI 8500.2 requirements. Off-site backups will be updated on a regular basis and the frequency will be documented in the contingency plan.
A tested and verifiable backup strategy will be implemented for web server software as well as all web server data files. Backup and recovery procedures will be documented and the Web Manager or SA for the specific application will be responsible for the design, test, and implementation of the procedures.
The site will have a contingency processing plan/disaster recovery plan that includes web servers. The contingency plan will be periodically tested in accordance with DoDI 8500.2 requirements.
The site will identify an off-site storage facility in accordance with DoDI 8500.2 requirements. Off-site backups will be updated on a regular basis and the frequency will be documented in the contingency plan.
V-6577
medium
The web server installation and configuration plan should not support the co-hosting of multiple services such as Domain Name Service (DNS), e-mail, databases, search engines, indexing, or streaming media on the same server that is providing the web publishing service. By separating these services additional defensive layers are established between the web service and the applicable application should either be compromised.
Disallowed or restricted services in the context of this vulnerability applies to services that are not directly associated with the delivery of web content. An operating system that supports a web server will not provide other services (e.g., domain controller, e-mail server, database server, etc.). Only those services necessary to support the web server and its hosted sites are specifically allowed and may include, but are not limited to, operating system, logging, anti-virus, host intrusion detection, administrative maintenance, or network requirements.
Disallowed or restricted services in the context of this vulnerability applies to services that are not directly associated with the delivery of web content. An operating system that supports a web server will not provide other services (e.g., domain controller, e-mail server, database server, etc.). Only those services necessary to support the web server and its hosted sites are specifically allowed and may include, but are not limited to, operating system, logging, anti-virus, host intrusion detection, administrative maintenance, or network requirements.
V-6724
low
The web server response header of an HTTP response can contain several fields of information including the requested HTML page. The information included in this response can be web server type and version, operating system and version, and ports associated with the web server. This provides the malicious user valuable information without the use of extensive tools.