Search filters this STIG's checks locally. Separate terms must all match (use quotes for an exact phrase). A search you ran on the Search page carries over here.
Assessment Title
Rule Text
The Cisco ISE must be configured to dynamically apply restricted access of endpoints that are granted access using MAC Authentication Bypass (MAB). This is required for compliance with C2C Step 4.
Description
Discussion Text
MAB can be defeated by spoofing the MAC address of a valid device. MAB enables port-based access control using the MAC address of the endpoint. A MAB-enabled port can be dynamically enabled or disabled based on the MAC address of the device that connects to it.
NPE devices that can support PKI or an allowed authentication type must use PKI. MAB may be used for NPE that cannot support an approved device authentication. Non-entity endpoints include IoT devices, VOIP phone, and printer.
NPE devices that can support PKI or an allowed authentication type must use PKI. MAB may be used for NPE that cannot support an approved device authentication. Non-entity endpoints include IoT devices, VOIP phone, and printer.
New to STIG checklists? Read What is a STIG checklist? and CKL vs CKLB.