Search filters this STIG's checks locally. Separate terms must all match (use quotes for an exact phrase). A search you ran on the Search page carries over here.
Assessment Title
Rule Text
The Cisco perimeter switch must be configured to filter egress traffic at the internal interface on an inbound direction.
Description
Discussion Text
Access lists are used to separate data traffic into that which it will route (permitted packets) and that which it will not route (denied packets). Secure configuration of switches makes use of access lists for restricting access to services on the switch itself as well as for filtering traffic passing through the switch.
Inbound versus Outbound: It should be noted that some operating systems default access lists are applied to the outbound queue. The more secure solution is to apply the access list to the inbound queue for three reasons:
- The switch can protect itself before damage is inflicted.
- The input port is still known and can be filtered upon.
- It is more efficient to filter packets before routing them.
Inbound versus Outbound: It should be noted that some operating systems default access lists are applied to the outbound queue. The more secure solution is to apply the access list to the inbound queue for three reasons:
- The switch can protect itself before damage is inflicted.
- The input port is still known and can be filtered upon.
- It is more efficient to filter packets before routing them.
New to STIG checklists? Read What is a STIG checklist? and CKL vs CKLB.