Search filters this STIG's checks locally. Separate terms must all match (use quotes for an exact phrase). A search you ran on the Search page carries over here.
Assessment Title
Rule Text
The Juniper EX switch must be configured to enable IP Source Guard on all user-facing or untrusted access VLANs.
Description
Discussion Text
IP Source Guard provides source IP address filtering on an untrusted layer 2 interface to prevent a malicious host from impersonating a legitimate host by assuming the legitimate host's IP address. The feature uses dynamic DHCP snooping and static IP source binding to match IP addresses to hosts on untrusted layer 2 access interfaces. Initially, all IP traffic on the protected interface is blocked except for DHCP packets. After a client receives an IP address from the DHCP server, or after static IP source binding is configured by the administrator, all traffic with that IP source address is permitted from that client. Traffic from other hosts is denied. This filtering limits a host's ability to attack the network by claiming a neighbor host's IP address.
This requirement is applicable to VLANs with active access interfaces assigned but not to switches that only trunk the VLANs between switches.
This requirement is applicable to VLANs with active access interfaces assigned but not to switches that only trunk the VLANs between switches.
New to STIG checklists? Read What is a STIG checklist? and CKL vs CKLB.