Search filters this STIG's checks locally. Separate terms must all match (use quotes for an exact phrase). A search you ran on the Search page carries over here.
Assessment Title
Rule Text
For nonlocal maintenance sessions using SNMP, the Juniper SRX Services Gateway must use and securely configure SNMPv3 with SHA256 or higher to protect the integrity of maintenance and diagnostic communications.
Description
Discussion Text
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Nonlocal maintenance and diagnostic activities are activities conducted by individuals communicating through an external network (e.g., the internet) or internal network.
The Juniper SRX allows the use of SNMP to monitor or query the device in support of diagnostic information. SNMP cannot be used to make configuration changes; however, it is a valuable diagnostic tool. SNMP is disabled by default and must be enabled for use. SNMPv3 is the DOD-required version but must be configured to be used securely.
Nonlocal maintenance and diagnostic activities are activities conducted by individuals communicating through an external network (e.g., the internet) or internal network.
The Juniper SRX allows the use of SNMP to monitor or query the device in support of diagnostic information. SNMP cannot be used to make configuration changes; however, it is a valuable diagnostic tool. SNMP is disabled by default and must be enabled for use. SNMPv3 is the DOD-required version but must be configured to be used securely.
New to STIG checklists? Read What is a STIG checklist? and CKL vs CKLB.