V7R3 changes
Network WLAN Controller Platform STIG V7R3 (2023-04-27) replaced V7R2 (2022-04-27): 1 check updated. It has 6 checks, against 6 in V7R2.
V7R3 checklistV7R2 checklist Compare V7R2 and V7R3 in STIG Compare
- 0 added
- 0 removed
- 1 updated
Updated fields: Check text 1Fix text 1Title 1
Updated in V7R3 (1)
V-243235CAT IIWLAN components must be FIPS 140-2 or FIPS 140-3 certified and configured to operate in FIPS mode.Title, Check text, Fix text
Title
WLAN components must be FIPS 140-2 or FIPS 140-3 certified and configured to operate in FIPS mode.
Check text
Review the WLAN equipment specification and verify it is FIPS 140-2/3 (CMVP) certified for data in transit, including authentication credentials. Verify the component is configured to operate in FIPS mode. If the WLAN equipment is not is FIPS 140-2/3 (CMVP) certified or is not configured to operate in FIPS mode, this is a finding.
Fix text
Use WLAN equipment that is FIPS 140-2/3 (CMVP) certified. Configure the component to operate in FIPS mode.
How these changes are found
Checks are matched across the two releases by V-number. A check counts as updated when DISA gave it a new rule revision (the r number in its SV-…_rule id) and its title, severity, check text, fix text, discussion, CCIs or other fields changed — the same comparison STIG Compare makes. Added checks are new V-numbers; removed checks are V-numbers V7R3 no longer has.
Comparing other releases, or this one against an older release? Pick any two in STIG Compare.