Search filters this STIG's checks locally. Separate terms must all match (use quotes for an exact phrase). A search you ran on the Search page carries over here.
Assessment Title
Rule Text
Information Security (INFOSEC) - Secure Room Storage Standards - Balanced Magnetic Switch (BMS) on Perimeter Doors
Description
Discussion Text
Failure to meet standards for ensuring that there is structural integrity of the physical perimeter surrounding a secure room (AKA: collateral classified open storage area) IAW DOD Manual 5200.01, Volume 3 could result in the undetected loss or compromise of classified material. When a physical Intrusion Detection System (IDS) is used as the supplemental protection measure (in lieu of 4-hour random checks) for secure rooms there is a requirement to place a Balanced Magnetic Switch (BMS) alarm contact on the primary ingress/egress door and any secondary/emergency exit doors. This alarm sensor is an essential part of any properly installed IDS and ensures that doors opened by force or that are left open are immediately detected. A BMS (AKA: triple biased alarm contact) is the most difficult door alarm contact to defeat and must be used in lieu of dual biased or simple alarm contacts.
REFERENCES:
CJCSI 6510.01F, INFORMATION ASSURANCE (IA) AND SUPPORT TO COMPUTER NETWORK DEFENSE (CND), Enclosure C, paragraphs 24.j. and 34.
NIST Special Publication 800-53 (SP 800-53), Controls: MP-4, PE-3, PE-5 and PE-6
DOD Manual 5200.01, Volume 3, SUBJECT: DOD Information Security Program: Protection of Classified Information: Appendix to Enclosure 3, paragraph 2.e.(4).
32 CFR 117 and 32 CFR 2001 and 2003 as well as DOD Manual 5220.32 Volume 1
REFERENCES:
CJCSI 6510.01F, INFORMATION ASSURANCE (IA) AND SUPPORT TO COMPUTER NETWORK DEFENSE (CND), Enclosure C, paragraphs 24.j. and 34.
NIST Special Publication 800-53 (SP 800-53), Controls: MP-4, PE-3, PE-5 and PE-6
DOD Manual 5200.01, Volume 3, SUBJECT: DOD Information Security Program: Protection of Classified Information: Appendix to Enclosure 3, paragraph 2.e.(4).
32 CFR 117 and 32 CFR 2001 and 2003 as well as DOD Manual 5220.32 Volume 1
New to STIG checklists? Read What is a STIG checklist? and CKL vs CKLB.